🌐 Mailman 3 November 2016 - Python-announce-list - python.org

ANN: PyDDF Python Sprint 2016
by eGenix Team: M.-A. Lemburg Nov. 8, 2016

Nov. 8, 2016

[This announcement is in German since it targets a Python sprint in Düsseldorf, Germany] ________________________________________________________________________ ANKÜNDIGUNG PyDDF Python Sprint 2016 in Düsseldorf Samstag, 19.11.2016, 10:00-18:00 Uhr Sonntag, 20.11.2016, 10:00-18:00 Uhr trivago GmbH, Karl-Arnold-Platz 1A, 40474 Düsseldorf Python Meeting Düsseldorf http://pyddf.de/sprint2016/ ________________________________________________________________________ INFORMATION Das Python Meeting Düsseldorf (PyDDF) veranstaltet mit freundlicher Unterstützung der *trivago GmbH* ein Python Sprint Wochenende im September. Der Sprint findet am Wochenende 19./20.11.2016 in der trivago Niederlassung am Karl-Arnold-Platz 1A statt (nicht am Bennigsen-Platz 1). Bitte beim Pförtner melden. Google Maps: https://www.google.de/maps/dir/51.2452741,6.7711581//@51.2450432,6.7714612,… Folgende Themengebiete haben wir als Anregung angedacht: * Openpyxl Openpyxl ist eine Python Bibliothek, mit der man Excel 2010+ Dateien lesen und schreiben kann. Charlie ist Co-Maintainer des Pakets. * MicroPython auf ESP8266 und BBC micro:bit MicroPython ist eine Python 3 Implementierung für Micro Controller. Sie läuft u.a. auf dem BBC micro:bit, einem Ein-Patinen-Computer, der in Großbritanien an Kinder der 7. Klassen verteilt wurde, und dem mittlerweile sehr populären IoT Chip ESP8266, der WLAN unterstützt. Im Sprint wollen wir versuchen, ein Mesh Network aus BBC micro:bits aufzubauen, das dann an einen ESP8266 mit dem WLAN verbunden wird. Alles mit Hilfe von MicroPython. Vorkenntnisse sind eigentlich keine nötig. Wir werden mindestens einen ESP8266 und drei BBC micro:bits zur Verfügung haben. Natürlich kann jeder Teilnehmer weitere Themen vorschlagen, z.B. * Kivy * Raspberry Pi * FritzConnection * OpenCV * u.a. Alles weitere und die Anmeldung findet Ihr auf der Sprint Seite: http://pyddf.de/sprint2016/ Teilnehmer sollten sich zudem auf der PyDDF Liste anmelden, da wir uns dort koordinieren: https://www.egenix.com/mailman/listinfo/pyddf ________________________________________________________________________ ÜBER UNS Das Python Meeting Düsseldorf (PyDDF) ist eine regelmäßige Veranstaltung in Düsseldorf, die sich an Python Begeisterte aus der Region wendet: * http://pyddf.de/ Einen guten Überblick über die Vorträge bietet unser YouTube-Kanal, auf dem wir die Vorträge nach den Meetings veröffentlichen: * http://www.youtube.com/pyddf/ Veranstaltet wird das Meeting von der eGenix.com GmbH, Langenfeld, in Zusammenarbeit mit Clark Consulting & Research, Düsseldorf: * http://www.egenix.com/ * http://www.clark-consulting.eu/ Mit freundlichen Grüßen, -- Marc-Andre Lemburg eGenix.com Professional Python Services directly from the Experts (#1, Nov 08 2016) >>> Python Projects, Coaching and Consulting ... http://www.egenix.com/ >>> Python Database Interfaces ... http://products.egenix.com/ >>> Plone/Zope Database Interfaces ... http://zope.egenix.com/ ________________________________________________________________________ ::: We implement business ideas - efficiently in both time and costs ::: eGenix.com Software, Skills and Services GmbH Pastor-Loeh-Str.48 D-40764 Langenfeld, Germany. CEO Dipl.-Math. Marc-Andre Lemburg Registered at Amtsgericht Duesseldorf: HRB 46611 http://www.egenix.com/company/contact/ http://www.malemburg.com/

1 0

Release: Celery 4.0 (latentcall)
by Ask Solem Nov. 7, 2016

Nov. 7, 2016

I'm happy to announce that a new major version of Celery has been released! To see the complete list of changes go here: [http://docs.celeryproject.org/en/latest/whatsnew-4.0.html](https://link.nyl… .com/link/c6kbuz4icejw17oc3qqi6syrm/local-d891639d-1557/0?redirect=http%3A%2F% 2Fdocs.celeryproject.org%2Fen%2Flatest%2Fwhatsnew-4.0.html&r=cHl0aG9uLWFubm91b mNlLWxpc3RAcHl0aG9uLm9yZw==) This is a massive release with over two years of changes. Not only does it come with many new features, but it also fixes a massive list of bugs, so in many ways you could call it our "Snow Leopard" release. The next major version of Celery will support Python 3.5 only, were we are planning to take advantage of the new asyncio library. This release would not have been possible without the support of my employer, Robinhood (we're hiring! [http://robinhood.com](https://link.nylas.com/link/c6kbuz4icejw17oc3qqi6syrm /local-d891639d-1557/1?redirect=http%3A%2F%2Frobinhood.com&r=cHl0aG9uLWFubm91b mNlLWxpc3RAcHl0aG9uLm9yZw==)). It's important that you read the "What's new in Celery 4.0" document before you upgrade, and since the list of changes is far too big to put in an email you have to visit the documentation: [http://docs.celeryproject.org/en/latest/whatsnew-4.0.html](https://link.nyl… .com/link/c6kbuz4icejw17oc3qqi6syrm/local-d891639d-1557/2?redirect=http%3A%2F% 2Fdocs.celeryproject.org%2Fen%2Flatest%2Fwhatsnew-4.0.html&r=cHl0aG9uLWFubm91b mNlLWxpc3RAcHl0aG9uLm9yZw==) Thank you for your support, \-- [ Ask Solem - github.com/ask | twitter.com/asksol ]

1 0

ANN: released psutil 5.0.0, introducing a 2x speedup for process methods
by Giampaolo Rodola' Nov. 6, 2016

Nov. 6, 2016

Hello all, I'm glad to announce the release of psutil 5.0.0: https://github.com/giampaolo/psutil This release introduces important speedups making psutil from 2x to 6x faster depending on what platform you're on. A full blog post can be found here: http://grodola.blogspot.com/2016/11/psutil-500-is-around-twice-as-fast.html About ===== psutil (process and system utilities) is a cross-platform library for retrieving information on running processes and system utilization (CPU, memory, disks, network) in Python. It is useful mainly for system monitoring, profiling and limiting process resources and management of running processes. It implements many functionalities offered by command line tools such as: ps, top, lsof, netstat, ifconfig, who, df, kill, free, nice, ionice, iostat, iotop, uptime, pidof, tty, taskset, pmap. It currently supports Linux, Windows, OSX, Sun Solaris, FreeBSD, OpenBSD and NetBSD, both 32-bit and 64-bit architectures, with Python versions from 2.6 to 3.5 (users of Python 2.4 and 2.5 may use 2.1.3 version). PyPy is also known to work. What's new ========== *2016-11-06* **Enhncements** - #799: new Process.oneshot() context manager making Process methods around +2x faster in general and from +2x to +6x faster on Windows. - #943: better error message in case of version conflict on import. **Bug fixes** - #932: [NetBSD] net_connections() and Process.connections() may fail without raising an exception. - #933: [Windows] memory leak in cpu_stats() and WindowsService.description(). Links ===== - Home page: https://github.com/giampaolo/psutil - Download: https://pypi.python.org/pypi/psutil - Documentation: http://pythonhosted.org/psutil - What's new: https://github.com/giampaolo/psutil/blob/master/HISTORY.rst -- Giampaolo - http://grodola.blogspot.com

1 0

PyCA cryptography 1.5.3 released
by Paul Kehrer Nov. 6, 2016

Nov. 6, 2016

PyCA cryptography 1.5.3 has been released to PyPI. cryptography is a package which provides cryptographic recipes and primitives to Python developers. Our goal is for it to be your "cryptographic standard library". We support Python 2.6-2.7, Python 3.3+, and PyPy. Changelog: SECURITY ISSUE: Fixed a bug where HKDF would return an empty byte-string if used with a length less than algorithm.digest_size. Credit to Markus Döring for reporting the issue. -Paul Kehrer (reaperhulk)

1 0

SCons 2.5.1 Released
by Bill Deegan Nov. 5, 2016

Nov. 5, 2016

Available at: https://sourceforge.net/projects/scons/files/latest/download?source=files Changelog: SCons - a software construction tool Change Log RELEASE 2.5.1 - Mon, 03 Nov 2016 13:37:42 -0400 From William Deegan: - Add scons-configure-cache.py to packaging. It was omitted From Alexey Klimkin: - Use memoization to optimize PATH evaluation across all dependencies per node. (PR #345) RELEASE 2.5.0 - Mon, 09 Apr 2016 11:27:42 -0700 From Dirk Baechle: - Removed a lot of compatibility methods and workarounds for Python versions < 2.7, in order to prepare the work towards a combined 2.7/3.x version. (PR #284) Also fixed the default arguments for the print_tree and render_tree methods. (PR #284, too) From William Blevins: - Added support for cross-language dependency scanning; SCons now respects scanner keys for implicit dependencies. - Notes for SCons users with heterogeneous systems. - May find new (previously missed) dependencies. - May cause rebuild after upgrade due to dependency changes. - May find new dependency errors (EG. cycles). - Discovered in some of the SCons QT tests. - Resolved missing cross-language dependencies for SWIG bindings (fixes #2264). - Corrected typo in User Guide for Scanner keyword. (PR #2959) - Install builder interacts with scanner found in SCANNERS differently. - Previous: Install builder recursively scanned implicit dependencies for scanners from SCANNER, but not for built-in (default) scanners. - Current: Install builder will not scan for implicit dependencies via either scanner source. This optimizes some Install builder behavior and brings orthogonality to Install builder scanning behavior. From William Deegan: - Add better messaging when two environments have different actions for the same target (Bug #2024) - Fix issue only with MSVC and Always build where targets marked AlwaysBuild wouldn't make it into CHANGED_SOURCES and thus yield an empty compile command line. (Bug #2622) - Fix posix platform escaping logic to properly handle paths with parens in them "()". (Bug #2225) From Jakub Pola: - Intel Compiler 2016 (Linux/Mac) update for tool directories. From Adarsh Sanjeev: - Fix for issue #2494: Added string support for Chmod function. From Tom Tanner: - change cache to use 2 character subdirectories, rather than one character, so as not to give huge directories for large caches, a situation which causes issues for NFS. For existing caches, you will need to run the scons-configure-cache.py script to update them to the new format. You will get a warning every time you build until you co this. - Fix a bunch of unit tests on windows

1 0

Trac 1.2 Released
by Ryan Ollos Nov. 4, 2016

Nov. 4, 2016

Trac 1.2 is now available. You can find the release at the usual place: https://trac.edgewall.org/wiki/TracDownload#LatestStableRelease Trac 1.2 is the first major release of Trac in more than 4 years. The following are some highlights from the release: * Extensible notification system (#3517) * Notification preference panel (#4056) * Usernames replaced with full names (#7339) * Restyled ticket changelog (#11835) * Workflow controls on the New Ticket page (#2045) * Editable wiki page version comments (#6573) * Datetime custom fields (#1942) You can find the detailed release notes for 1.2 on the following pages: https://trac.edgewall.org/wiki/1.2/TracChangeLog https://trac.edgewall.org/wiki/TracDev/ReleaseNotes/1.1 Now to the packages themselves: URLs: https://download.edgewall.org/trac/Trac-1.2-py2-none-any.whl https://download.edgewall.org/trac/Trac-1.2.tar.gz https://download.edgewall.org/trac/Trac-1.2.win32.exe https://download.edgewall.org/trac/Trac-1.2.win-amd64.exe https://download.edgewall.org/trac/Trac-1.2.zip MD5 sums: 6ee8b4d749eba651d82019bb11cfdee0 Trac-1.2-py2-none-any.whl ff3a7d78099a269ae2035a6cf8adccbb Trac-1.2.tar.gz 29fb381b01554063e687f68e21582e96 Trac-1.2.win32.exe 973bae7da4de2dd8b94947b486344096 Trac-1.2.win-amd64.exe 1fcd80a33bc29be9e4b5cab0cee9e32b Trac-1.2.zip SHA1 sums: 8c47aa3de4111889e9b2b9f11885b1e6a01ec934 Trac-1.2-py2-none-any.whl f4c2cca41f7e7d1def37b736a502bbb9db72df2b Trac-1.2.tar.gz 96ec3b6662baa59ffaa6407de50be9c12fa525ef Trac-1.2.win32.exe 44ad3efa7d70c6c7a186a53de46554e62bb57e99 Trac-1.2.win-amd64.exe c1ad79e79ac8c3a6df91305ba6a12f931bab22b1 Trac-1.2.zip We look forward to your feedback on the release candidate. /The Trac Team http://trac.edgewall.org/

1 0

ANN: pandas v0.19.1 released!
by Joris Van den Bossche Nov. 4, 2016

Nov. 4, 2016

Hi all, I'm pleased to announce the release of pandas 0.19.1. This is a bug-fix release from 0.19.0 and includes some small regression fixes, bug fixes and performance improvements. We recommend that all users upgrade to this version. See the v0.19.1 Whatsnew page <http://pandas.pydata.org/pandas-docs/version/0.19.1/whatsnew.html> for an overview of all bugs that have been fixed in 0.19.1. Thanks to all contributors! Joris --- *How to get it:* Source tarballs and windows/mac/linux wheels are available on PyPI (thanks to Christoph Gohlke for the windows wheels, and to Matthew Brett for setting up the mac/linux wheels). Conda packages are already available via the conda-forge channel (conda install pandas -c conda-forge). It will be available on the main channel shortly. *Issues:* Please report any issues on our issue tracker: https://github.com/pydata/ pandas/issues *Thanks to all the contributors of the 0.19.1 release:* - Adam Chainz - Anthonios Partheniou - Arash Rouhani - Ben Kandel - Brandon M. Burroughs - Chris - chris-b1 - Chris Warth - David Krych - dubourg - gfyoung - Iván Vallés Pérez - Jeff Reback - Joe Jevnik - Jon M. Mease - Joris Van den Bossche - Josh Owen - Keshav Ramaswamy - Larry Ren - mattrijk - Michael Felt - paul-mannino - Piotr Chromiec - Robert Bradshaw - Sinhrks - Thiago Serafim - Tom Bird

1 0

Release: Elevation 1.0.0 downloads global SRTM 30m DEM on demand
by Alessandro Amici Nov. 4, 2016

Nov. 4, 2016

I am pleased to announce the release of version 1.0.0 of Elevation, a tool for easy access to global terrain digital elevation models, SRTM 30m DEM and SRTM 90m DEM: http://elevation.bopen.eu/en/stable/quickstart.html Elevation is currently considered feature complete, its command-line and python APIs are frozen and it sees constant production use. If you encounter any problems, please file an issue along with a detailed description on the development page: https://github.com/bopen/elevation Contributions are highly welcomed and appreciated, every little help counts, so do not hesitate! The project is free and open source software distributed under the terms of the Apache License, Version 2.0. and the development has been sponsored by my employer B-Open Solutions http://bopen.eu. Alessandro - @alexamici <https://twitter.com/alexamici> CTO at B-Open Solutions - http://bopen.eu

1 0

Release: Elevation 1.0.0 downloads global SRTM 30m DEM on demand
by Alessandro Amici Nov. 4, 2016

Nov. 4, 2016

I am pleased to announce the release of version 1.0.0 of Elevation, a tool for easy access to global terrain digital elevation models, SRTM 30m DEM and SRTM 90m DEM: http://elevation.bopen.eu/en/stable/quickstart.html Elevation is currently considered feature complete, its command-line and python APIs are frozen and it sees constant production use. If you encounter any problems, please file an issue along with a detailed description on the development page: https://github.com/bopen/elevation Contributions are highly welcomed and appreciated, every little help counts, so do not hesitate! The project is free and open source software distributed under the terms of the Apache License, Version 2.0. and the development has been sponsored by my employer B-Open Solutions http://bopen.eu. Alessandro - @alexamici <https://twitter.com/alexamici> CTO at B-Open Solutions - http://bopen.eu

1 0

ANN: PyWavelets v0.5.0 release
by Gregory Lee Nov. 3, 2016

Nov. 3, 2016

On behalf of the PyWavelets development team I am pleased to announce the release of PyWavelets 0.5.0. PyWavelets is a Python toolbox implementing both discrete and continuous wavelet transforms (mathematical time-frequency transforms) with a wide range of built-in wavelets. C/Cython are used for the low-level routines, enabling high performance. Key Features of PyWavelets are: * 1D, 2D and nD Forward and Inverse Discrete Wavelet Transform (DWT and IDWT) * 1D, 2D and nD Multilevel DWT and IDWT * 1D and 2D Forward and Inverse Stationary Wavelet Transform * 1D and 2D Wavelet Packet decomposition and reconstruction * 1D Continuous Wavelet Transform * When multiple valid implementations are available, we have chosen to maintain consistency with MATLAB's Wavelet Toolbox. PyWavelets 0.5.0 is the culmination of 1 year of work. In addition to several new features, substantial refactoring of the underlying C and Cython code have been made. Highlights of this release include: - 1D continuous wavelet transforms - new discrete wavelets added (additional Debauchies and Coiflet wavelets) - new 'reflect' extension mode for discrete wavelet transforms - faster performance for multilevel forward stationary wavelet transforms (SWT) - n-dimensional support added to forward SWT - routines to convert multilevel DWT coefficients to and from a single array - axis support for multilevel DWT - substantial refactoring/reorganization of the underlying C and Cython code Full details in the release notes at: http://pywavelets.readthedocs.io/en/latest/release.0.5.0.html This release requires Python 2.6, 2.7 or 3.3-3.5 and Numpy 1.9.1 or greater. Sources can be found on https://pypi.python.org/pypi/PyWavelets and https://github.com/PyWavelets/pywt/releases. As always, new contributors are welcome to join us at https://github.com/PyWavelets/pywt

1 0