🌐 Mailman 3 May 2002 - Pythonmac-SIG - python.org

Re: [Pythonmac-SIG] ObjC stuff
by Jack Jansen March 20, 2003

March 20, 2003

Recently, Steve Spicklemire <steve(a)spvi.com> said: > So it's in CVS somewhere? I'll do a check-out and see if I can find it. I don't know, Steven Majewski may know (I think he is the one who looked at it). If it isn't in the repository it probably should be, preferrably in the Modules directory (because it is useful for non-Mac users) but if there's objections against that we'll put it in the Mac/Modules dir. > I just ordered CW-6 today so I might be able to pitch in a bit. While very useful for other things (like MacPython development) you don't need it for OSX unix-Python development: this is all make and gcc-based (and you have those on your OSX developer disc). -- Jack Jansen | ++++ stop the execution of Mumia Abu-Jamal ++++ Jack.Jansen(a)oratrix.com | ++++ if you agree copy these lines to your sig ++++ www.oratrix.nl/~jack | see http://www.xs4all.nl/~tank/spg-l/sigaction.htm

5 4

Re: [Pythonmac-SIG] more on MacPython/OSX/shared lib
by Jack Jansen Aug. 14, 2002

Aug. 14, 2002

Recently, Paul Miller <paul(a)fxtech.com> said: > >My next step is to remove all my Python code and see if I get the error > >without linking against Python. > > Back to square 1 for me. I removed the Python lib and all my Python code > and I have the same problem. It must be something in global initialization > in my own code. For yucks I disabled the __initialize and __terminate entry > points in the linker options and I ended up with an assert in my code > (which was expecting the static initializations to happen). Hmm, my guess would be either a bug in CodeWarrior, or (probably more likely) you using the wrong runtime library. Especially if you use C++ you have to be careful with which runtime library you use where, because the zero-overhead exception handling will fail otherwise. And you shouldn't use Python as an example, because it doesn't follow the rules (but gets away with it being a C program). You might want to spell out the MW Targeting MacOS manual. -- Jack Jansen | ++++ stop the execution of Mumia Abu-Jamal ++++ Jack.Jansen(a)oratrix.com | ++++ if you agree copy these lines to your sig ++++ www.cwi.nl/~jack | see http://www.xs4all.nl/~tank/spg-l/sigaction.htm

4 5

Worm Klez.E immunity
by housecall_feedback May 30, 2002

May 30, 2002

*** A virus was detected by the security administrator; this message was discarded ***

1 0

Problems with Aqua python 2.3 vs. FINK python 2.2
by Robb Brown May 29, 2002

May 29, 2002

I have both the FINK Python 2.2 distribution and Python 2.3 built from sources including Aqua Tkinter. I'm having some problems importing certain modules under Python 2.3 (they all work fine under the FINK Py2.2). Numpy works fine under both. Biggles gives the following under 2.3: >>> from biggles import * Traceback (most recent call last): File "<stdin>", line 1, in ? File "/Library/Frameworks/Python.framework/Versions/2.3/lib/python2.3/site-packages/biggles/__init__.py", line 24, in ? from biggles import \ File "/Library/Frameworks/Python.framework/Versions/2.3/lib/python2.3/site-packages/biggles/biggles.py", line 24, in ? import config, _biggles ImportError: Failure linking new module: : dyld: /Applications/Python.app/Contents/MacOS/python Undefined symbols: /Library/Frameworks/Python.framework/Versions/2.3/lib/python2.3/site-packages/biggles/_biggles.so undefined reference to _PyArg_ParseTuple expected to be defined in the executable /Library/Frameworks/Python.framework/Versions/2.3/lib/python2.3/site-packages/biggles/_biggles.so undefined reference to _PyCObject_AsVoidPtr expected to be defined in the executable /Library/Frameworks/Python.framework/Versions/ >>> VTK gives the following under 2.3: >>> from vtkpython import * Traceback (most recent call last): File "<stdin>", line 1, in ? File "/Library/Frameworks/Python.framework/Versions/2.3/lib/python2.3/site-packages/vtk/vtkpython.py", line 29, in ? exec "from "+kit_name+" import *" File "<string>", line 1, in ? ImportError: Failure linking new module: : dyld: /Applications/Python.app/Contents/MacOS/python Undefined symbols: _PyArg_VTKParseTuple _PyVTKClass_Check _PyVTKClass_New _PyVTKClass_vtkCollectionNew _PyVTKClass_vtkDataObjectNew _PyVTKClass_vtkImplicitFunctionNew _PyVTKClass_vtkLocatorNew _PyVTKClass_vtkObjectNew _PyVTKClass_vtkPointLocator2DNew _PyVTKClass_vtkPointLocatorNew _PyVTKClass_vtkScalarsToColorsNew _PyVTKClass_vtkSourceNew _vtkPythonCheckArray__FP7_objectiPfi _vtkPythonCheckArray__FP7_objectiPii _vtkPythonGet Any suggestions? Thanks, -- ______________________________ Robb Brown Seaman Family MR Research Centre Calgary, Alberta, Canada

1 0

False Alarm on Tiny Text
by Dan Shafer May 29, 2002

May 29, 2002

It turns out I had a CVS configuration issue that prevented me from running the latest updated files in some cases. The PythonCard codeEditor runs and looks fine. coolness. -- Dan Shafer, Product Development Expert Helping you turn your best ideas into products that sell http://www.danshafer.com

1 0

Assert Failed
by Dan Shafer May 29, 2002

May 29, 2002

If I launch any Python applications using the PythonLauncher, I get a Debug dialog which says: "Assert failed in file ../src/common/fileconf.cpp at line 1522." Debug message. "Do you want to stop the program? You can also choose [Cancel] to suppress further warnings." if I click "No" in the dialog, I sometimes get a second identical debug dialog. Then the application runs fine (at least as far as I can tell). Running under Python2.2 from the Terminal, I get the following traceback in Terminal window: 09:31:32: Debug: /usr/local/lib/libwx_macd-2.3.rsrc 09:31:35: Debug: Unrecognized accel key 'TAB', accel string ignored. 09:31:35: Debug: Unrecognized accel key 'TAB', accel string ignored. 09:31:35: Error: file '/Users/dshafer/pycode/PythonCardPrototype/stc-styles.rc.cfg', line 1: '=' expected. 09:31:35: Debug: Assert failed in file ../src/common/fileconf.cpp at line 1522. Hope this helps with debugging! -- Dan Shafer, Product Development Expert Helping you turn your best ideas into products that sell http://www.danshafer.com

1 0

PythonCard codeEditor on OS X
by Kevin Altis May 29, 2002

May 29, 2002

Some of you have probably already seen that I updated PythonCard (in cvs) today for some of the recent changes in the wxPython Mac preview. I'm forwarding the message below since I brought up the issue of a free or low-cost Python editor to use on the Mac previously. After that exchange and a week of not being thrilled with the Python support in BBEdit, I ended up writing an editor for PythonCard. We were eventually going to write an editor and since the first version only took me about 15 minutes, it seemed like a good weekend project. The wiki page about the editor is at: http://wiki.wxpython.org/index.cgi/PythonCardEditor This isn't a replacement for BBEdit, but a number of PythonCard users and developers are using it (it is good to eat your own dog food ;-) Since it has a shell, is extensible via Scriptlets, can do syntax checks, syntax coloring, auto-indents correctly, etc. it is actually better than some other editors not tuned to Python. Plus it is free with full source (in Python) and will be improved and integrated with other parts of PythonCard this summer. I've been on vacation most of this month, but in the next week or so I will be tweaking the editor for any Mac OS X specific issues that crop up. Feedback, bug reports, abuse, whatever, should be directed to me directly or the PythonCard mailing list. Enjoy, ka -----Original Message----- From: pythoncard-users-admin(a)lists.sourceforge.net [mailto:pythoncard-users-admin@lists.sourceforge.net]On Behalf Of Kevin Altis Sent: Tuesday, May 28, 2002 6:41 PM To: pythoncard-Users Subject: [Pythoncard-users] latest fixes for Mac OS X wxSTC is working on Mac OS X, so I've updated PythonCard in cvs, so that the Shell, Message Watcher, codeEditor, and samples that use the Shell (turtle, radioclient) can be used on Mac OS X. The big change was simply disabling the style additions (STCStyleEditor.py) and using the default styles. This seems to work pretty well. There are still display problems such as the text being cut off on the right edge of the line, which is probably a bad text extent calculation not taking into account anti-aliasing. There are also problems with some key bindings, but the shell and codeEditor both appear to be usable. I only did minimal testing, so feel free to identify other problems. The latest MachoPython and wxPython Mac builds are at: http://sourceforge.net/project/showfiles.php?group_id=10718&release_id=56880 I tested using MachoPython-2.2.1-3.dmg and wxMacPython-2002-05-17.dmg The stockprice and SourceForgeTracker samples work now that the XML parsers are included in the MachoPython build. STCStyleEditor.py support will be added back in for WXMAC once Riaan, Robin, Neil (somebody) updates the code to support WXMAC. ka ______________________________________________ Pythoncard-users mailing list Pythoncard-users(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/pythoncard-users

1 0

dummy quesion (?)
by luzi1＠gmx.net May 27, 2002

May 27, 2002

Hi there! I'm a PC user (shame on me), but what i want to do is create a stand alone version for mac of my python code. (i already did this for PC using a tool called py2exe and it worked just fine). is there a way to do it? i have some friends who use mac and i want them to be able to use my code without them having to install python seperately...there has to be a way, hasn't there? (sorry if i'm annoying, i'm a green horn, i admit...) thnx Luzi T.

2 1

Eros e soldi:guadagna con internet 0,08 euro a clic
by lolita May 23, 2002

May 23, 2002

sono lolita, voglio presentarti il mio nuovo sito affiliazione gratuita con guadagni immediati: erotismo, chat,loghi e sonerie etc, etc, l'unico sito che paga cos� tanto 0,08 euro a clic ............................guarda bene la pg di affiliazione............................e buon divertimento. visita il sito: http://members.xoom.it/marym1976 http://members.xoom.it/marym1976 http://members.xoom.it/marym1976

1 0

uninstalling python221 mac os X
by *-pike May 23, 2002

May 23, 2002

Hi I've accidently installed python 221 on macosX. Can I uninstall it ? How ? if the answer is "no" .. hm ... I would have expected to be warned. the installer really looked horrible, i thought it was just some small app ... anyway, thanks for any suggestions, *-pike

2 1