[[["์ดํดํ๊ธฐ ์ฌ์","easyToUnderstand","thumb-up"],["๋ฌธ์ ๊ฐ ํด๊ฒฐ๋จ","solvedMyProblem","thumb-up"],["๊ธฐํ","otherUp","thumb-up"]],[["์ดํดํ๊ธฐ ์ด๋ ค์","hardToUnderstand","thumb-down"],["์๋ชป๋ ์ ๋ณด ๋๋ ์ํ ์ฝ๋","incorrectInformationOrSampleCode","thumb-down"],["ํ์ํ ์ ๋ณด/์ํ์ด ์์","missingTheInformationSamplesINeed","thumb-down"],["๋ฒ์ญ ๋ฌธ์ ","translationIssue","thumb-down"],["๊ธฐํ","otherDown","thumb-down"]],["์ต์ข ์ ๋ฐ์ดํธ: 2025-08-30(UTC)"],[[["\u003cp\u003eThis documentation refers to Apigee hybrid version 1.8, which is now end-of-life and requires an upgrade to a newer version.\u003c/p\u003e\n"],["\u003cp\u003eInstalling Apigee hybrid involves navigating to the \u003ccode\u003e<var translate="no">hybrid-base-directory</var>\u003c/code\u003e \u003ccode\u003e/hybrid-files\u003c/code\u003e directory and executing commands from there, as the overrides file uses relative paths.\u003c/p\u003e\n"],["\u003cp\u003eBefore applying changes, users should perform dry runs of the \u003ccode\u003einit\u003c/code\u003e and \u003ccode\u003eapply\u003c/code\u003e commands to identify potential errors without altering the cluster.\u003c/p\u003e\n"],["\u003cp\u003eThe installation process uses \u003ccode\u003eapigeectl\u003c/code\u003e commands to initialize and apply configurations, followed by checking pod readiness with \u003ccode\u003ekubectl\u003c/code\u003e commands.\u003c/p\u003e\n"],["\u003cp\u003eAfter successfully applying configurations, Apigee-specific runtime components are installed, and the user is prompted to expose Apigee ingress as the next step.\u003c/p\u003e\n"]]],[],null,["# Step 8: Install hybrid runtime\n\n| You are currently viewing version 1.8 of the Apigee hybrid documentation. **This version is end of life.** You should upgrade to a newer version. For more information, see [Supported versions](/apigee/docs/hybrid/supported-platforms#supported-versions).\n\nApply the configuration to the cluster\n--------------------------------------\n\n\nUse the following steps to install Apigee hybrid into your cluster:\n\n1. Be sure that you are in the \u003cvar translate=\"no\"\u003ehybrid-base-directory\u003c/var\u003e`/hybrid-files` directory. \n\n ```\n cd $HYBRID_FILES\n ```\n | **Note:** Because the overrides file specifies service account files using paths relative to your \u003cvar translate=\"no\"\u003ehybrid-base-directory\u003c/var\u003e`/hybrid-files` directory, you must execute the commands from within that directory.\n2. Verify that `kubectl` is set to the correct context using the following command. The current context should be set to the cluster to which you are deploying Apigee hybrid. \n\n ```\n kubectl config get-contexts | grep \\*\n ```\n3. *For **Anthos on bare metal** , **AWS on GKE** , **EKS** , and **GKE on prem** platforms only* , Verify that the `KUBECONFIG` variable is set using the following command. \n\n ```\n echo ${KUBECONFIG}\n ```\n4. Do a *dry run* initialization. Doing a dry run lets you check for any errors before any changes are made to the cluster. Execute the `init` command with the `--dry-run` flag as follows: \n\n ```\n ${APIGEECTL_HOME}/apigeectl init -f overrides/overrides.yaml --dry-run=client\n ```\n **Note:** Apigee hybrid 1.8 supports `kubectl` version 1.21 and newer. If you are installing an older version of hybrid and using `kubectl` version 1.8 or older the syntax for the `--dry-run` flag will be `--dry-run=true`. You will need to update your `kubectl` to version 1.21 or newer before installing Apigee hybrid 1.8.\n5. If there are no errors, execute the `init` command as follows: \n\n ```\n ${APIGEECTL_HOME}/apigeectl init -f overrides/overrides.yaml\n ```\n\n The `init` command installs the [Apigee deployment\n services](/apigee/docs/hybrid/v1.8/apigee-deployment-services) Apigee Deployment Controller and Apigee Admission Webhook.\n6. To check the status of the deployment, you can use the following commands: \n\n ```\n ${APIGEECTL_HOME}/apigeectl check-ready -f overrides/overrides.yaml\n ``` \n\n ```\n kubectl get pods -n apigee-system\n ``` \n\n ```\n kubectl get pods -n apigee\n ```\n\n\n When the pods are ready, go to the next step.\n7. Do a *dry run* install. Execute the `apply` command with the `--dry-run` flag. \n\n ```\n ${APIGEECTL_HOME}/apigeectl apply -f overrides/overrides.yaml --dry-run=client\n ```\n8. If there are no errors, you can apply the [Apigee-specific runtime components](/apigee/docs/hybrid/v1.8/what-is-hybrid#about-the-runtime-plane) to the cluster with the following command: \n\n ```\n ${APIGEECTL_HOME}/apigeectl apply -f overrides/overrides.yaml\n ```\n9. To check the status of the deployment, run the following command: \n\n ```\n ${APIGEECTL_HOME}/apigeectl check-ready -f overrides/overrides.yaml\n ```\n\n\n Repeat this step until the pods are all ready. The pods may take several minutes to start up.\n\n| **Congratulations!**\n|\n| You've successfully installed and configured the Apigee hybrid runtime plane. Now it's time\n| to connect it to the outside world.\n[1](/apigee/docs/hybrid/v1.8/install-create-cluster) [2](/apigee/docs/hybrid/v1.8/install-cert-manager) [3](/apigee/docs/hybrid/v1.8/install-apigeectl) [4](/apigee/docs/hybrid/v1.8/install-service-accounts) [5](/apigee/docs/hybrid/v1.8/install-create-tls-certificates) [6](/apigee/docs/hybrid/v1.8/install-configure-cluster) [7](/apigee/docs/hybrid/v1.8/install-enable-synchronizer-access) [8](/apigee/docs/hybrid/v1.8/install-hybrid-runtime) [(NEXT) Step 9: Expose Apigee ingress](/apigee/docs/hybrid/v1.8/install-expose-apigee-ingress) [10](/apigee/docs/hybrid/v1.8/install-deploy-proxy)\n\n\u003cbr /\u003e"]]
