[[["์ดํดํ๊ธฐ ์ฌ์","easyToUnderstand","thumb-up"],["๋ฌธ์ ๊ฐ ํด๊ฒฐ๋จ","solvedMyProblem","thumb-up"],["๊ธฐํ","otherUp","thumb-up"]],[["์ดํดํ๊ธฐ ์ด๋ ค์","hardToUnderstand","thumb-down"],["์๋ชป๋ ์ ๋ณด ๋๋ ์ํ ์ฝ๋","incorrectInformationOrSampleCode","thumb-down"],["ํ์ํ ์ ๋ณด/์ํ์ด ์์","missingTheInformationSamplesINeed","thumb-down"],["๋ฒ์ญ ๋ฌธ์ ","translationIssue","thumb-down"],["๊ธฐํ","otherDown","thumb-down"]],["์ต์ข ์ ๋ฐ์ดํธ: 2025-09-04(UTC)"],[],[],null,["# Configure connectors in Shared VPC service projects\n\nIf your organization uses Shared VPC, you can set up a\nServerless VPC Access connector in either the service project or the\nhost project. This guide shows how to set up a connector in the service project.\n\nIf you need to set up a connector in the host project, see\n[Configure connectors in the host project](/run/docs/configuring/shared-vpc-host-project).\nTo learn about the advantages of each method, see\n[Connecting to a Shared VPC network](/run/docs/configuring/connecting-shared-vpc).\n\nAt a high level, you must take the following steps:\n\n1. [Grant permissions](#grant-permissions)\n2. [Create a subnet](#subnet)\n3. In the page [Configuring Serverless VPC Access](/vpc/docs/configure-serverless-vpc-access), complete the steps in the following sections:\n - [Create a Serverless VPC Access connector](/vpc/docs/configure-serverless-vpc-access#create-connector)\n - [Configure your serverless environment to use a connector](/vpc/docs/configure-serverless-vpc-access#configure-environment)\n - [Configure firewall rules for connectors](/vpc/docs/configure-serverless-vpc-access#restrict-access)\n\nGrant permissions to service accounts in your service projects\n--------------------------------------------------------------\n\nFor each service project that will use VPC Connectors, a Shared VPC\nAdmin must grant the Compute Network User\nrole ([`compute.networkUser`](/compute/docs/access/iam#compute.networkUser)) in the\nhost project to the service project `cloudservices` and `vpcaccess` service\naccounts.\n\nTo grant the role:\n\n1. Use these commands:\n\n ```bash\n gcloud projects add-iam-policy-binding HOST_PROJECT_ID \\\n --role \"roles/compute.networkUser\" \\\n --member \"serviceAccount:service-\u003cvar translate=\"no\"\u003eSERVICE_PROJECT_NUMBER\u003c/var\u003e@gcp-sa-vpcaccess.iam.gserviceaccount.com\"\n ``` \n\n ```bash\n gcloud projects add-iam-policy-binding HOST_PROJECT_ID \\\n --role \"roles/compute.networkUser\" \\\n --member \"serviceAccount:\u003cvar translate=\"no\"\u003eSERVICE_PROJECT_NUMBER\u003c/var\u003e@cloudservices.gserviceaccount.com\"\n ```\n2. If the `@gcp-sa-vpcaccess` service account does not exist, turn on the\n Serverless VPC Access API in the service project and try again:\n\n ```bash\n gcloud services enable vpcaccess.googleapis.com\n ```\n\n \u003cbr /\u003e\n\nIf you prefer not to grant these service accounts access to the entire\nShared VPC network and would rather only grant access to specific subnets, you\ncan instead [grant these roles to these service accounts on specific subnets only](/vpc/docs/shared-vpc#svc_proj_admins).\n\nCreate a subnet\n---------------\n\nWhen using Shared VPC, the Shared VPC Admin must create a subnet\nfor each connector. Follow the documentation in\n[adding a subnet](/vpc/docs/create-modify-vpc-networks#add-subnets) to add a `/28`\nsubnet to the Shared VPC network. This subnet must be in the same region\nas the serverless services that will use the connector.\n\nNext steps\n----------\n\n- In the page [Configuring Serverless VPC Access](/vpc/docs/configure-serverless-vpc-access), complete the steps in the following sections:\n - [Create a Serverless VPC Access connector](/vpc/docs/configure-serverless-vpc-access#create-connector).\n - [Configure your serverless environment to use a connector](/vpc/docs/configure-serverless-vpc-access#configure-environment).\n- Use network tags to [restrict connector VM access to VPC resources](/run/docs/configuring/vpc-connectors#connector-to-resource)."]]
